How do I install Ead Enterprise Suite?

Copy the stdio config for Cursor, Claude Desktop, Claude Code, or VS Code on this page. It uses the publisher's install, not a PlugMCP proxy.

Does Ead Enterprise Suite need an API key?

The publisher lists these environment variables: MCP_ALLOW_INSECURE_FILE_URL, MCP_ALLOW_UNVERIFIED_BEARER, MCP_ALLOWED_HOSTS, MCP_ALLOWED_ORIGINS, MCP_API_BASE_URL, MCP_AUTH_USER_KEY, MCP_HTTP_HOST, MCP_HTTP_MAX_BODY_BYTES, MCP_HTTP_PUBLIC, MCP_SVC_CLIENT_ID, MCP_SVC_CLIENT_SECRET, MCP_SVC_INTROSPECT_URL, PORT.

What transport does Ead Enterprise Suite use?

Ead Enterprise Suite runs locally over stdio.

When was Ead Enterprise Suite last checked?

Last checked 2026-11-09. MCP server for EAD Enterprise Suite - signatures, evidence, notifications, dossiers via AI agents.

Ead Enterprise Suite MCP server

Power your agent

Add this server

The publisher's own command. Not a PlugMCP endpoint.

Add to Cursor Add to VS Code Run on PlugMCP

Host a copy with our keys and logs.

Local command

npx -y @g-digital/[email protected]

Credentials from the publisher

MCP_ALLOW_INSECURE_FILE_URL — Set to "true" to allow plain http:// fileUrl downloads in evidence_create (default https-only). Private/internal addresses are rejected regardless (resolution-time check; see the documented DNS TOCTOU limitation in the hosted-deployment runbook).
MCP_ALLOW_UNVERIFIED_BEARER — Escape hatch for MCP_HTTP_PUBLIC=true WITHOUT inbound-token introspection: set to "true" ONLY when an upstream gateway already verifies Bearer tokens. The server logs a prominent warning and forwards tokens upstream unverified.
MCP_ALLOWED_HOSTS — Comma-separated allowed Host headers. Empty = Host validation disabled (default). When set, requests with a Host outside the list are rejected.
MCP_ALLOWED_ORIGINS — Comma-separated allowed browser Origins (DNS-rebinding defense). Empty = reject any request carrying an Origin header; non-browser clients (CLI/SDK) send no Origin and are always allowed. Use '*' to allow all.
MCP_API_BASE_URL — Upstream API root. Required: your user key is exchanged for a session token against this host, and the server will not start without it.
MCP_AUTH_USER_KEY — Long-lived EAD Enterprise Suite user key, exchanged automatically for a short-lived session token. Use it for headless or automated access instead of an account password. (See https://www.eadtrust.eu/soluciones-legaltech/enterprise-suite/ for credential acquisition.)
MCP_HTTP_HOST — Interface the HTTP transport binds to. Default 127.0.0.1 (localhost only). Set 0.0.0.0 to expose on all interfaces (containers do this automatically).
MCP_HTTP_MAX_BODY_BYTES — Maximum accepted POST /mcp request-body size in bytes (default 16777216 = 16 MiB — sized so base64 file uploads within the documented tool limits fit). Oversized requests get a 413 JSON-RPC error before/while reading — closes a memory-exhaustion DoS vector in public deployments. Note: base64 file sources are capped by this limit BEFORE MCP_FILE_MAX_BYTES applies.
MCP_HTTP_PUBLIC — Set to "true" for public/multi-tenant deployments. Activates Host validation and refuses to start unless (1) MCP_ALLOWED_ORIGINS or MCP_ALLOWED_HOSTS is set AND (2) inbound Bearer introspection is configured (MCP_SVC_INTROSPECT_URL + MCP_SVC_CLIENT_ID/SECRET) or MCP_ALLOW_UNVERIFIED_BEARER=true is set explicitly (fail-closed).
MCP_SVC_CLIENT_ID — Client ID this server presents to the introspection endpoint above (its resource-server credentials). Only needed alongside MCP_SVC_INTROSPECT_URL; it does not authenticate you to EAD Enterprise Suite.
MCP_SVC_CLIENT_SECRET — Client secret this server presents to the introspection endpoint above (its resource-server credentials). Only needed alongside MCP_SVC_INTROSPECT_URL; it does not authenticate you to EAD Enterprise Suite. (See https://www.eadtrust.eu/soluciones-legaltech/enterprise-suite/ for credential acquisition.)
MCP_SVC_INTROSPECT_URL — RFC 7662 token introspection URL for inbound Bearer verification in HTTP mode. Opt-in, and required when MCP_HTTP_PUBLIC=true. Leave empty for stdio (local) use.
PORT — HTTP port when running in hosted (HTTP) mode; ignored in stdio mode

Claude Code has no install link for a local command. Copy the command below and run it in a terminal.

shClaude Code

1MCP_ALLOW_INSECURE_FILE_URL=<value> MCP_ALLOW_UNVERIFIED_BEARER=<value> MCP_ALLOWED_HOSTS=<value> MCP_ALLOWED_ORIGINS=<value> MCP_API_BASE_URL=<value> MCP_AUTH_USER_KEY=<secret> MCP_HTTP_HOST=<value> MCP_HTTP_MAX_BODY_BYTES=<value> MCP_HTTP_PUBLIC=<value> MCP_SVC_CLIENT_ID=<value> MCP_SVC_CLIENT_SECRET=<secret> MCP_SVC_INTROSPECT_URL=<value> PORT=<value> claude mcp add io.github.g-digital-by-garrigues-ead-enterprise-suite -- npx -y @g-digital/mcp-ead-enterprise-suite@2.0.0

Run in a terminal.

jsonClaude Desktop

1{2  "mcpServers": {3    "io.github.g-digital-by-garrigues-ead-enterprise-suite": {4      "command": "npx",5      "args": [6        "-y",7        "@g-digital/[email protected]"8      ],9      "env": {10        "MCP_ALLOW_INSECURE_FILE_URL": "<value>",11        "MCP_ALLOW_UNVERIFIED_BEARER": "<value>",12        "MCP_ALLOWED_HOSTS": "<value>",13        "MCP_ALLOWED_ORIGINS": "<value>",14        "MCP_API_BASE_URL": "<value>",15        "MCP_AUTH_USER_KEY": "<secret>",16        "MCP_HTTP_HOST": "<value>",17        "MCP_HTTP_MAX_BODY_BYTES": "<value>",18        "MCP_HTTP_PUBLIC": "<value>",19        "MCP_SVC_CLIENT_ID": "<value>",20        "MCP_SVC_CLIENT_SECRET": "<secret>",21        "MCP_SVC_INTROSPECT_URL": "<value>",22        "PORT": "<value>"23      }24    }25  }26}

claude_desktop_config.json

Local · npmPublisher installStep-by-step: add this in Claude

Remote URL or a command on your machine? How the two installs differ

Tools

No tool list yet. Remote servers get one after the first health check.

FAQ

Ead Enterprise Suite